125 - Automatic Air Vent ELITE with Stopvalve
Dripfree Model
The gasket provides a large safety distance between the water level and the venting mechanism, so that the upper part of the air vent is sealed against any possible splashing water. Dirt and suspended particles cannot therefore enter the venting mechanism.
The Air Vent is patented.
Structural Pressure 12 bar (174 psi)
Working Pressure 6 bar (87 psi)
Temperature Rating max. 110°C (230°F) water (no steam)
Also available for Solar Systems
Turning cap, therefore adjustable in the desired position
Brass Body and Cap
Fluid: water and water/glycol mixtures (30%).
Description
 |
1 Cu Zn 40 Pb 2 - DIN EN 12165 |
| 2 Cu Zn 40 Pb 2 - DIN EN 12165 | |
| 3 TPX | |
| 4 Cu Zn 39 Pb 3 - DIN EN 12164 | |
| 5 Cu Zn 39 Pb 3 - DIN EN 12164 | |
| 6 Stainlees Steel |
|
| 7 Polypropylene |
|
| 8 NBR 70 Shore | |
| 9 NBR 70 Shore | |
| 10 Cu Zn 39 Pb 3 - DIN EN 12164 |
|
Dimensions in mm
|
Stop Valve for ELITE Figure 111
Brass
Plastic Insert for 3/8”, 3/8” x 1/2” and 3/8” x 3/4”
Brass Insert for 1/2” x 1/2”
With O-Ring at the connection with the Air Vent except for 11164
| 111 | Size |
|---|---|
| 11153 | 3/8“ x 3/8” |
| 11155 | 3/8“ x 1/2“ |
| 11164 | 1/2“ x 1/2“ |
| 11166 | 3/8“ x 3/4“ |
