Control ball valve for modulating control of the medium
Ball with linear characteristic
Brass Body
Pressure Rating PN 40 (580 psi) up to 1”
                           PN 25 (362,5 psi) from 1 1/4”
Temperature Rating max. 110°C (230°F) water (no steam)
Threaded Female Ends according to ISO 7-1

Complete with 3-point actuator with open-close control
Power supply                        230 VAC 50/60 Hz
Power consumption              3,5 VA
Auxiliary switch                      1 x EPU 5 (1) A, AC 250 V
Switching point                      adjustable 0 … 100%
Manual operation                  temporary and permanent disengagement of the gearing latch
Running time for 90° angle   140 sec.
Torque                                    min. 10 Nm (at nominal voltage)
Ambient temperature            -0°C to + 50°C (32°F to +122°F) non condensing
Protection class                      IP 40
Mode of operation                 Type 1.B (EN 60730-1)

Other actuators on demand

Dimension in mm 598+031 DN R L L1 H H1 H2 B SW 59804 FF + 031 15 1/2” 60 93 137 38 28 80 65 59806 FF + 031 20 3/4” 68 93 140 41 31 80 31 59808FF + 031 25 1” 81 93 147 49 38 80 41 59810 FF + 031 32 1 1/4” 95 93 151 52 42 80 50 59812 FF + 031 40 1 1/2” 106 93 156 58 47 80 55 59816 FF + 031 50 2” 127 93 164 65 55 80 7